Plastic wall coverings are easily installed with adhesive glue/contact cement. Tin like appearance at a much more affordable price. The rolls are 2 feet wide. One small roll will cover approximately 52 square feet. There will be a flat rate shipping fee of $19.00 for the 26 foot roll. Back splash Wall coverings are also available by square foot for a price of $2.69 per square foot. Restaurant renovation, Bathroom remodel, office renovation, wall cover. INSTALLATION INSTRUCTIONS FOR PVC BACK SPLASH. 1.Measure the total length of the piece you wish to install. Cut the piece at the desired length, with regular scissors. 2.Fit the piece under the cupboards 3.Apply glue (contact cement) on the back of the back splash and on the wall (where you are going to attach it). We suggest Gel Contact Cement. Each PVC backsplash comes in a roll; it is therefore recommended that you use either an object to hold down one side of the roll while rolling it out or have someone help you hold it on the other side to ensure ease and stability. 4.Let the glue dry till it become “tacky” and attach the piece to the wall, squeezing out all the air from behind the backsplash. You are done! Now you can cover the edges of a back splash with metal/wood/plastic edging and start enjoying your new back splash!We would recommend using DAP Contact Cement (original formula). That works great. But the new neoprene based formula does not work at all.